● The lowering type crossover-bridge can be connected with automatic or 3/4-auto screen printing machine. It’s easier for
correcting and cleaning the screen frame.
● Wickets: Adopt high grade round steel material and fix by welding, formed by the oil pressure. The wickets are all with antirust
treatment.
● PLC for synchronously running with automatic cylinder screen printing machine. (optional)
● Automatic clamps for holding substrates during transmission. And the substrates will be released at the delivery and collected
by the collecting tray after one cycle. (optional)
● The strength of the cooling fans is adjustable.
● Structure of hot section: double layer insulation, side checking door, blowing motor with speed adjuster, exhaust ducting hole.
Model
|
KY-72WT-H
|
KY-86WT-H
|
KY-102WT-H
|
KY-116WT-H
|
---|---|---|---|---|
Max. substrate size (mm)
|
720 x 520
|
800 x 600
|
1050 x 750
|
1160 x 830
|
Each module Length (mm)
|
2440
|
|||
Wicket no. of each module
|
3/4” chain: 256 Pcs ( inlet + rear = 84pcs) ; 1” chain: 192 Pcs (inlet + rear =74 Pcs)
|
|||
Power source
|
3∮ 220V/380V 50/60HZ
|
|||
Max. temperature
|
60℃
|
|||
Remarks: the 3/4” chain type without clamps for the wicket.
Optional items: (1) Machine length (2) Higher temperature (3) Clamps for the wickets (4) PLC for connecting with automatic screen printing machine (5) Stainless steel wickets |
Suitable for drying plastic card, name plate, membrane switch, plastic hang tag, sticker, transfer paper etc. after screen printed.